2025 TALBERT 35CC

2025

TALBERT

New

RGN Lowboy  Gooseneck design Ratchet Loaded 5th wheel height 51" Swing radius 90" Support cylinder Hydraulically operated with 4" x 3" cylinder mount cross member Power source Hydraulic couplings: 3/4" fixed at front with piping for wet line Gooseneck locks Ratchet Electrical receptacle Seven pin connector Coverplate Aluminum 1) Full penetration weld on gooseneck gusset 2) Base pivot tube reinforcement Additional gooseneck specifications 2. DECK Deck section design Four beam Deck section length 24'-0" (23'-6" clear) Deck section width 8'-6" Loaded road clearance 6" Loaded deck height 22" Flooring 1-1/2" apitong secured with deck screws; no lumber between main beams Gooseneck/deck connection Horizontal pin and plate with remote lock Deck/rear bridge connection Fixed/welded Outriggers 12" swinging/removable with double hook-on at front of deck Slope front of deck top down With smooth plate & traction bars Heavy duty front folding ramps 32" wood filled Expanded metal Between main beams 1st deck section at front Additional deck specifications None 3. REAR BRIDGE Rear bridge section width 8'-6" Loaded rear bridge height 36" Page 1 of 4 - Order number SN40838 Talbert Manufacturing, Inc. 1628 W. State Road 114, Rensselaer, IN, USA ( Number of axles 2 Axle spacing 54" Axle capacity 25,000# - GAWR 20,280# Brakes 16-1/2" x 7" air actuated with spring brakes on one axle Anti-lock brake system 2 sensor, 1 modulator system Ten (10) stud; 285.75mm BC aluminum/steel disc hub piloted system with oil seals, inner wheels steel with outer aluminum wheels Dura-Bright Wheels Tires Eight (8) 255/70R22.5 (H) 16PR radials Suspension Ridewell air Exhaust Valve Manual Manual raising & lowering (+3"/-3") Talbert +3",-3" with over ride chains on all axles Rear Bridge Center Section Boom well, cross members recessed - recess 1st member additionally Wide center bolster With chain slots and flag holder slots Rear half bolster Rear of axle 2 Front bridge ramp Sloped to deck outboard of main beams with smooth plate and traction bars Additional rear bridge specifications None 4. GENERAL 12 volt system with the following: All lights to be LED including mid-turn, excluding license plate light 3 marker lights each side of deck including mid-turn Strobe lights and switch at rear Battery back-up system with switch at rear to flash all marker/tail lights and strobe lights, battery mounted in battery box Lights and wiring Paint Valspar standard Talbert black 8 total - 4 each side of deck (bent style), 8 total Lash rings Estimated empty weight 14,580#

Hydraulic

Steel

Air Ride

Aluminum/Steel

Tandem