2026 ALDURA 10.36 m x 259.08 cm

2026

ALDURA

New

SandStorm

SANDSTORM Ready for all your Frac sand hauling. Electric opening system available as an option. CALL FOR PRICE!!! Capacity: 575 cu. ft. Design Pressure: 15 PSI - tested at 23 PSI Overall Length: 34" Height: 12' 10" Width: 102 in. Weight: 9,940 Lbs. approx. Material: Carbon Steel Suspension: Air Ride Hendrickson 60,000 lbs. capacity Compartments: Single Hopper(s): One (1) cone with 45° slope and aerators Shell: 10 Gauge A36 High resistance steel Product Valves: One (1) 6" butterfly valve, steel body, cast iron disc and steel stem Discharge Line: 4" steel pipe sch40 connected with cam style connectors. A sand discharge hose is arrached from the third tee to the bummper level,a female coupler is included at end . One (1) Steel Bottom -Drop BTI Sand 6" x " Tee Walkway: Toe-kicks on top Loading Lines: Two (2) 4" loading lines in the rear Pressure Control: 3" butterfly valve to regulate hot airflow to product discharge line Check valve: First check valve in the hot air inlet line and second check valve in front of first tee. Hose holder: P.T.O. hose holder with mandrel located on roadside. Load Lines: Two (2) Steel sch 40 load lines, 1 mounted at each end of tank with adaptor and cap Pluming: 3" inlet tubing 10 gauge steel. All valves and pluming on drive side of trailer Blow down line: (Top air) 3" steel line with 3" butterfly valve and mechanical relief valve. Top air line includes a 3" valve ti relief tank air with a 3" exhaust directed to the ground Hose Tube: One (1) Galvanized steel 8"x20' on curbside Axles: Two (2) 30,000 lbs. each, 120 in. wide, 77.5 in. track TP type with automatic slack adjuster. Brakes :Air brakes with booster FMVSS-121 ,ABS 4S/2M Bendix anti lock brake system Tires: Eight (8) 22.5 x 11R 16 ply. Wheels: All aluminum wheels 22.5" 10 hole budd. Upper Coupler: Adjustable 3/8 in. plate with Holland king pin at 49" height. Access Ladder: One (1) located on the driver side with handrails External Coating: Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT) Landing Gear: One (1) two speed Heavy Duty (80,000 lbs. total) with handle on driver's side. Frame: Full Length 3/16 in. STRENX high resistance formed steel (For lighter weight). Fenders: Four (4) Aluminum (front and rear) Lights: Sealed harness and recessed Optronics GloLights LED per DOT. Two (2) rear work lights with switch at rear Conspicuity tape : GRIOTE Per DOT Mud Flaps Four (4) Anti-sail Air Storage Tank: One (1) air tank Bumper: Formed steel. DOT approved. Paint Prep: All steel surfaces washed, degreased and shotblasted. External Coating: AXALTA two coats of polyurethane on an epoxy prime (4-6 mils DFT) Paint applied before electrical installation Manways: One (1) 20 in. sealed manways on top (Betts) with aluminum lid with hinge on the right

10.36 m

259.08 cm

16.28 m3

Steel

Air Ride

24.5

Aluminum/Steel

Tandem