2026 EXA 165BBL ST VACUUM TANK

2026

EXA

New

Non-Code

165BBL STEEL TANK

NEW EXA 165 BBL Steel Vacuum Trailer Non-Code Capacity: 6,930 gal. + 1% Expansion Commodity: Transportation of oilfield fluids such as water, mud, oil field waste. Design Pressure: 25 PSI, tested at 23 PSI Overall Length: 45.5 ft Height: 10 ft. 7 in. Weight: 21,300 lbs Width: 102 in Material: Carbon Steel Suspension: Air Hendrickson HT300 90,000 lbs. capacity Baffles: Three (3) domed steel 1/4 in. thk Bulkheads: 1/4" thk steel Non-code ASME Shape Compartments: Single Overturn Protection: Two (2), at front and back of tank Shell: 1/4" steel shell Stiffeners: External 3/8" x 3" C-channel rolled steel rings Welding: Inside and out, minimal tie-ins with MIG welding Connections: 3 in. vacuum connector Outlet: Two (2) 4 in. butterfly valves at rear Shut Off: Ball type primary in front manway and ball type secondary 12 Gal. on driver's side front with drain Venting/Reliefs: 1-1/2 in. vacuum relief, 2 in. pressure relief, both located at the top front of barrel, 2 in. blow down line at rear Axles: Three (3) 30,000 lbs. each, 120 in. wide, 77.5 in. track TP type with automatic slack adjuster. Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M Bendix anti-lock brake system Bumper: 4 in. X 3 in. tube Frame: 1/4" steel formed Landing Gear: 2 speed Heavy Duty Tires: Twelve (12) 11R X 24.5 all-terrain tires Upper Coupler: Adjustable plate with Holland king pin Wheels: Twelve (12) All-steel 24.5" 10 hole hub pilot Access Ladder: One (1) safety side ladder on driver's side Manways: Three (3) on top of the tank, one (1) on the rear bulkhead, 20 in. domed style with plates swing bolts and wing nuts, and one (1) 12" domed style on top front used as the primary shut off. External Coating: Hempel two coats of polyurethane on an epoxy primer Internal Liner: Hempel epoxy liner Paint Prep: All steel surfaces sandblasted inside and out Conspicuity tape: 3M Per DOT Fenders: Two (2) full lenght formed hose tray (10 GA) with 1/4 in. supports on both sides Lights: Sealed harness and Optronics GloLights LED per DOT. Two rear work lights with integrated switches. Sight Glass: Sight glass liquid level indicator on the rear right side of the bulkhead Mud Flaps: Two (2) IKON logo anti-sail Tool Box: One (1) on driver's side (20 in. X 16 in. X 24 in.) Vacuum Manometer: One (1) located in the rear Optional Lift Axle: Rear axle with lift system. Optional Walkwat: Full length walkway with rear and middle access, handrails and toe kicks Optional Fluid level: Level-sight rear or front located Optional Fluid level: Float level indicator on the rear bulkhead Paint Color: Available in a variety of different colors on steel parts Under tank optionals: Additional tool boxes, tire carrier, chain carrier, stainless steel frames

26,232.9 L

1

Mild Steel

Mild Steel

4

Straight Round

Air Ride

11R24.5 16 Ply

All Steel

Tri

Fixed

13.84 m

259.08 cm

3.23 m