2025 EXA 1030CF PNEUMATIC TRAILER CUSTOM

2025

EXA

New

1030CF CUSTOM

Custom paint work 1,030 cf Steel Light Pneumatic Dry Bulk Trailer Capacity: 1,030 cu. ft. Commodity: Transportation of silica sand, limestone, cement and other bulk commodities Design Pressure: 15 PSI, tested at 23 PSI Material: Steel Suspension: Air Hendrickson 30k capacity each Weight: 11,850 Lbs. approx. Height: 12 ft. 5.5 in. Overall Length:42 ft. Width:102 in. Compartments: Single Shell: 10 Gauge A572-55 High resistance steel Welding: Inside and out, minimal tie-ins with automatic welding Hopper(s): Three (3) cones with 45° slope and three aerator kits with independent ball valve Product Valves: Three (3) 6" BTI butterfly valve Discharge line: 4" steel pipe sch40 connected with cam style connectors. A sand discharge hose is arrached from the third tee to the bumper level, a female coupler is included at end. Three (3) Steel bottom-drop BTI Sand hog 6"x4" Tee's . Pressure control: 3" butterfly valve to regulate hot airflow to product discharge line Check valves: First check valve in the hot air inlet line and second check valve in front of first tee. Hose holder: P.T.O. hose holder with mandrel located on roadside. Pluming: 3" inlet tubing 10 gauge steel. All valves and pluming on driver side of trailer. Blow down line: (Top air) 3" steel line with 3" butterfly valve and mechanical relief valve. Top air line includes a 3" valve to relief tank air with a 3" exhaust directed to the ground. Hose tube: Four (4) Galvanized steel. One (1) 8"x20' and one (1) 8"x10' on each side on top of the rear fenders. Axles: Two (2) 30,000 lbs. each, 120 in. wide, 77.5 in. track TP type with automatic slack adjuster. Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M Bendix anti-lock brake system. Bumper: Foremed steel. DOT approved. Frame: Full Length 3/16 in. DOMEX high resistance formed steel (For lighter weight). Landing Gear: Two (2) JOST two speed Heavy Duty (80,000 lbs. total) with handle on driver's side. Tires: Eight (8) 24.5 x 11R 16 ply. Upper Coupler: Adjustable 3/8 in. plate with Holland king pin at 49" height. Wheels: All aluminum wheels 24.5" 10 hole budd. Access Ladder: One (1) located in the rear with handrails and grab handles EX-Access® (For increased safety). Manways: Three (3) On middle and rear hoppers. 20 in. sealed manways on top (Betts) with aluminum lid with hinge on the right. Walkway: Anti-slip tape and toe-kicks on top. Paint Prep: All steel surfaces washed, degreased and sandblasted External Coating: Jones-Blair two coats of polyurethane on an epoxy primer (4-6 mils DFT). Paint applied before electrical installation. Fenders: Four (4) Aluminum (front and rear) Pressure gauges: Two (2) liquid filled, pressure range 0-30 psi located on street side on frame rail between first hoppers with light Tow feature: Two (2) "U" round bar welded to frame's rails. Lights: Sealed harness and recessed Optronics GloLights LED per DOT. Two (2) rear work lights with switch at rear Conspicuity tape: 3M Per DOT Mud Flaps Four (4) Anti-sail with NEXA logo Optional Multiple configurations: A wide variety of discharge options, loading lines, piping arrangements, and multiple compartments Paint Color: Available in a variety of different colors

29.17 m3

1

Mild Steel

Air Ride

24.5 16 ply

All Aluminum

Tandem

Fixed

12.8 m

259.08 cm

3.2 m