2026 TITAN 53' 2 AXLE WALKING FLOOR TRAILER

2

2026

TITAN

New

T7TD000115- 2/7409

2026 TITAN 53' 2 AXLE WALKING FLOOR TRAILERS 2 UNITS AVAILABLE CALL FOR PRICING Customer application Garbage – 3.5” Drive Base model 53-2-TW-WF – Open Top Style Straight Wall configuration Front To Suit Garbage Application Sides 7-14” +1-6” panels to suit garbage application Rear Door Side Swing, Door in Door, Lights in Door, Air Release w/ Reinforced bottom lock finger - See Note # 7 Overall length 53ft Overall width 102” Nominal Overall height 13’ 0-13/16” (156.8125”) approx King pin location 36” WELD IN Upper coupler 5/16” THK Steel - Set at 48” high Number of Axles Primary Two (2) Axles 5” Round .580 Wall – Straight Spindle – See Note # 6 Axle track 77.5” Suspension Reyco 21B FAB w/inner & upper wear pads & 3 leaf springs Location of spreads See axle layout Hub/drum assembly 10 Stud Duralite – Hub/Centrifuse Drum Disc wheel size 8.25 x 22.5 Rims ALUM LVL Outer/Inner Tires Brand Goodyear Size 11R22.5 – 41.4 dia Tread Endurance RST Ply 16 Quantity 8 Axle layout FRONT – Prim -50 - Prim - 84 - REAR Oil seals To suit axles Lubricants 80W-90 Brakes ABS 2S/1M Meritor Wabco Slack adj. DRUM BRAKES: Meritor Auto Cam Enclos DRUM BRAKES: All Axles & c/w Dust Shields Lift kits None Lift controls None Frame width 48” Rear bumper Aluminum, offset, push w/ underride – See Note # 1 Option #1 Tow shackles Option #2 Steel vertical blocks -protrudes 3 ½” sloped top bolted to bumper Option #3 None Tire carrier None Landing gear SAF-Holland Mark V: 105 Skid Foot, Standard hollow axle – See Note #1 Top rail Titan Tapered, V1 Top cross tube Qty 2 – Spring Steel (two piece style) – See Note #4 Floor crossmembers 12” Centers Keith walking floor kit Running floor II – 3.5” Dia Cylinders – 10” stroke – See Note # 8 Slat model & width 26 slats: 2299 Slats (1/2” Triple Ridge Impact – 3.5”W), 1212 seals, T-Blocks at Rear Slat wear strips 48’ long, Flush, Filler bar wear strips Continuous bearing Continuous Splash/Hold Down Bearings Side wall wear plates Boomerang style Front access door STD 35w x 37.5h Sealed – Curbside Hinge with flip step, located center Tarp style None Tarp header None Tarp basket None Tarp hooks Side hooks approx. 48” o/c with 4 hooks on rear door Axle fender None Hyd fitting Pressure 1” Quick Coupler – Male Return 1” Quick Coupler – Female Mud flaps Style Titan black rubber Location (2) Behind Primary group & none at rear Mud flap – Landing gear None Paint Body – color Natural aluminum Run – gear Titan black Hub / drum Same as running gear Rims or Disc Aluminum Light package Front: (1) mkr per corner mitre. Sides: (2) mkrs (includes midturn) Rear: (5) mkrs at top, (3) 4” round red taillights per side in door Option #1 Install Rear Taillights in rear door & license plate in door Option #2 None Access Catwalk Universal Roadside entry 24” catwalk J-Ladder Frt Roadside to Catwalk J-Ladder Rear Middle of Rear door full height – See Note # 3 Steps Frt out None Steps Frt in None Steps Rear None Additional specifications: 1. Approximately 39’ 9-1/2” from center of landing gear to rear of bumper 2. a) Add 9’ hoses to front wall b) Add hinged lid hose hanger to front wall 3. Top stirrup step for front access ladder needs to be located approximately 20” down from top. Grab handle is still needed 4. a) Spring bars to be located 17’ from front and 17’ from rear b) Prep Sidewalls at center for future spring bar 5. Air release tailgate controls to be located in control box 6. Invert axles 7. Tapered door header with 1-PC gusset attached to top side of tapered header. Gusset to suit 10” bolt on tarp header 8. Add 2.5” hydraulic pressure gauge to frame (flush mount), located beside the on/off handle with identifying label Estimated weight: 19,136 lbs +/- 3% Estimated volume: 135.49 cu yds