2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车
    2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车
    2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车
    2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车2014 PINNACLE 500 BBL SMOOTH WALL Used 水力压裂罐半挂车 罐式半挂车
    照片(4)

    2014 PINNACLE 500 BBL SMOOTH WALL

    水力压裂罐半挂车 罐式半挂车
    致电询价 

    STAR MFG

    联系人:Daryl Hale

    Lufkin, Texas, 美国 75904

    常规

    数量
    10
    年限
    2014
    制造商
    PINNACLE
    状况
    二手
    描述
    Model/Size: 21,000 Gallon/500 Barrel/80,000 Liter Type: Frac Tank Portable - Trailer Style Stairs and Platforms at Front of Tanks Condition: Excellent Condition with Good Brakes, Tires, and New Lights Specifications: FLOOR: 1/4 PL, 4” V-Bottom with Integral Formed Side Channels FLOOR SUPPORT: 10” Channel Longitudinal Runners with 8” Channel and Formed 1/4 PL Channel Crossmembers WALLS: 1/4 PL Solid Welded, Smooth Inside, with Formed Channel Supports Outside ROOF: 2-Step Design, 1/4 PL Solid Welded with Channel Supports Outside FRONT/REAR: 1/4 PL Solid Welded, Smooth Inside, with Formed Channel Supports Outside DRAIN/FILL: 4” Drain at Floor each End w/Valve, 3” Fill Elbow at Roof, 4” Flange w/Valve on Front - Flanged on Inside, 8” Flange on Front w/Blind Cover Plate - Flanged on Inside, 4” Flange w/Blind Cover Plate on Roof, 2” Coupling w/Plug on Roof, 4” Coupling w/Plug on Roof, PV Vent on Roof MANWAY: 21” Manway on Front, Side, Rear Roof PICK UP: Standard 5th Wheel King Pin WELDS: All Welds Continuous Except Substructure Crossmembers AXLE: 22,500 lbs. Axle with Air Brakes, 11.00X22.5 Tires on Steel Disc Wheels ACCESS: Front Ladder and Stairway with Grating Walkway to Roof Manway, Stationary and Fold-Down Handrail System HYDRO TESTING: Full Capacity Test @ 3 PSI ACCESSORIES: Pressure/Vacuum Relief Vent, Ball Float Level Gauge (Installed) COATINGS: Steel Grit Blast Inside and Out, 100% Solids Epoxy Chemical Resistant Interior Lining @ 20 mil DFT, Exterior Coated with High Solids Rust Inhibiting Polyurethane @ 5 mil DFT Overall Dimensions: Length: 42ft Width: 8.5ft Height: 11ft

    类别特定

    组成
    Mild Steel

    机壳

    轮子
    全钢