2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车
    2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车
    2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车
    2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车
    2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车
    2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车2026 EXA SCRAP/DEMOLITION EXTREMER New 端卸半挂车 自卸半挂车
    照片(6)

    2026 EXA SCRAP/DEMOLITION EXTREMER

    端卸半挂车 自卸半挂车
    致电询价 

    IKON TRAILERS

    联系人:Sam Rosenbaum

    Marion, Texas, 美国 78124

    常规

    年限
    2026
    制造商
    EXA
    状况
    新建
    DOT
    描述
    NEW EXA Scrap/Demolition Frameless End Dump - Extremer Capacity: 89 cu. yds. Commodity: Transportation of scrap, construction debris Dump angle: 45 degrees, all 8 tires stay on the ground Overall Length: 42 ft. Height: 12 ft 4 in, 105" side walls Width: 102 in. Weight: 22,800 lbs Hydraulic Dump Hoist: 8", 5-stage inverted trunnion mount by Custom Hoists. Front-mounted outside of bulkhead. Suspension: 50,000 lbs Hutch- Single Point Tandem with Oscillating Trunnion Bushing Body: 5mm Hardox 450 Steel (175 Ksi, 450 Brinell Hardness) Top Rail: 4" x 4" x 1/4" tube with angle Gate: 3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness). Barn Door style with hinges on the curb side, air operated bottom latch and integrated mud flaps Front: 3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness) Bracing: 1/4" High strength steel internally stiffened Axles: Two (2) 30,000 lbs. each axle with automatic slack adjusters and Stemco wheel ends. Brakes: 16.5" x 7" brakes with 2S1M ABS Landing Gear: One (1) pair of Holland 2-speed landing gear Upper Coupler: Oscillating fifth wheel plate with Holland King Pin Draft Arms: 5”x3”x1/4” Rectangular Tube Tires: Eight (8) 11R x 24.5 16 Ply Wheels: Eight (8) 8.25 x 24.5 Steel 10 hole hub pilot, white Access Ladder: Steel front Coating: Two coats of polyurethane high-gloss on an epoxy primer (4-6 mils DFT) Paint Prep: All steel surfaces shotblasted and pre chem wash Conspicuity tape: 3M Per DOT Fenders: Front and rear steel bolt-on Full Dump Position: Without lifting the front wheels Lights: Sealed harness and recessed LED per DOT and ICC Mud Flaps: Two (2) attached to rear gate Paint Color: Available in a variety of different colors. Standard paint colors: White, Black, Gray Option- Wheels: Aluminum Option- Length: Custom capacity (ex. 40ft long; 100" sides, 87 cu yds) Option-Side walls Height 84"-105" side walls (65-99 cu yds) Option- Frame: Quarter frame Option Tarp: Cramaro electric or manual options Option- Fenders: Aluminum or steel front fenders

    重量与尺寸

    长度
    12.8 m
    宽度
    259.08 厘米
    高度
    3.76 m
    内部高度
    266.7 厘米

    承载量

    气动大小
    68.05 m3

    类别特定

    组成
    Dump Angle
    45 °
    Gate Type
    Side Hinge
    Two Speed Landing Gear
    Ladder
    Ladder Location

    机壳

    框架类型
    无框架
    悬挂
    弹簧
    轮胎
    11R24.5 16 Ply
    轮子
    全钢
    后轴数量
    串联
    轴类别
    固定
    挡泥板
    Mud Flaps